17
Fig. 9 - Low Battery Condition
Low Battery Condition
• Voltage level is checked upon activation and every 10
minutes during operation.
• When 75 % of the Rated Power has been consumed,
only the lower bar of the Indicator will be displayed and
the full icon will flash (Fig. 9) once per second as a
warning that the Battery is to be replaced prior to con-
ducting any further dives.
• Upon decreasing to a voltage level that will no longer
sustain proper operation, the Battery Indicator will flash 5
times followed by shutdown of the unit.
• If a Low Battery Condition exists when the unit is manu-
ally activated (by pressing the button), the graphic bAT
and the Battery Indicator will appear flashing for 5
seconds followed by shutdown of the unit.
• If the button is not pressed to activate the unit prior to a
dive (e.g., the unit activated automatically by immersion
in water), and a Low Battery Condition exists, the Battery
Indicator will appear flashing as a warning upon descent
past 4 feet (1.2 meters). No other information will be
displayed and the unit will not enter Dive Mode.
To Next Page
Loading...
