43
TO SET - USER SET DIGITAL GAUGE MODE
(while in the Surface Mode)
Factory set OFF, Digital Gauge Mode can also be set ON.
The effects of this feature being ON or OFF are described on
page 64.
• Press Both buttons simultaneously, release when SET: 2
appears (4 seconds).
• Press and release the Left (Advance) button, the Units
screen appears with the set point flashing.
• Press the Left (Advance) button 17 more times.
• The graphic GAU appears with OFF (or ON) flashing
(Fig. 41).
• Press and release the Right (Select) button to toggle
between ON and OFF.
• Press the Left (Advance) button to accept the setting and
advance to Set Water Activation, or press and hold Both
buttons for 2 seconds to revert to Surface Mode.
NOTE: Once a
dive is made with
this feature set
ON, the setting will
be locked ON for
24 hours after the
dive. Set Digital
Gauge Mode will
not appear as a
selection during
that 24 hour
period.
Fig. 41 - Set Digital Gauge Mode
To Next Page
Loading...
Need help?
General
