Oceanic Dive Computer Pro Plus 2 - SURFACING FROM A SIMULATED DIVE

81
DEMO
PSI
ATR
O
2
N
2
Surfacing from a Simulated Dive
• The Simulator will enter Demo Surface Mode (Fig.
94) upon ascending to 3 feet (1 meter) or shallower.
• Press and hold the Right (Select) button for 4 seconds to
access Time Acceleration. The small Time Clock icon will
begin flashing.
• Tap (press/release) the Right (Select) button to increase
Surface Interval Time 1 minute per real time second.
• Tap (press/release) the Right (Select) button during the
Time Acceleration to restore the time rate to normal.
• FO2 can be set 10 minutes after surfacing.
• Tap (press/release) the Left (Advance) button to access
FO2 Set Mode. The FO2 graphic and value previously
set will appear with the value flashing.
• Press/release the Right (Select) button to increase the
FO2 value in increments of 1%, or press and hold it to
scroll.
• Tap (press/release) the Left (Advance) button to accept
the FO2 setting and return to Demo Surface Mode.
• To make another dive, press and hold the Right (Select)
button for 2 seconds to access Dive Mode.
• To revert operation to real Surface Mode, press and hold
Both buttons simultaneously for 2 seconds.
Fig. 94 - Demo Surface Mode