26
ATR
FEET
MAX
O
2
N
2
TO SET - MAX DEPTH ALARM
(while in the Surface Mode)
Factory set for 330 feet, the Alarm can be set to values
between 30 feet (3 meters) and 330 feet ( 99 meters) in
increments of 10 feet (3 meters).
• Press Both buttons simultaneously, release when SET: 1
appears (2 seconds).
• Press and release the Left (Advance) button, FO2 ap-
pears with the value flashing.
• Press the Left (Advance) button 1 more time.
• The graphics FEET MAX and dEEP, and Alarm icon
appear with the Max Depth set point value flashing
(Fig. 21).
• Press and release the Right (Select) button until the
desired Depth Alarm value appears; or press and hold to
scroll through the set points.
• Press the Left (Advance) button to accept the setting and
advance to Elapsed Dive Time Alarm, or press and hold
Both buttons for 2 seconds to revert to Surface Mode.
Fig. 21 - Set Max Depth Alarm
To Next Page
Loading...
