Need help?Do you have a question about the Oceanic Pro Plus and is the answer not in the manual?
Represents nitrogen loading and shows no decompression or decompression status visually.
Shows oxygen loading and tolerance dosage (OTU), indicating potential oxygen exposure limits.
Visually indicates ascent speed, warning against excessive rates with color-coded segments.
Describes the different audible alerts and their meanings for potential dangers or violations.
Details the procedure to activate the Pro Plus, including diagnostic checks and calibration.
Recommends reviewing PDPS for planning dives and avoiding decompression/oxygen limits.
Explains how the Pro Plus enters No Decompression Dive Mode upon descending.
How the Pro Plus accounts for reduced NDLs at higher elevations and recalibrates depth.
How to access the PDPS to view adjusted NDLs based on previous dives.
Explains how to avoid and manage decompression using the Pro Plus.
Offers a way to monitor proximity to the No Decompression Limit visually.
Explains how the Pro Plus activates Decompression Dive Mode when limits are exceeded.
Describes the different violation modes (Conditional, Delayed, Immediate) the Pro Plus can enter.
How the Pro Plus enters this mode if ascending shallower than the required stop depth.
Conditions that cause the Pro Plus to enter delayed violation mode.
Information on managing and avoiding excessive oxygen exposure.
How the Pro Plus enters this mode when PO2 equals or exceeds 1.40 ATA.
How the O2 bar graph represents oxygen accumulation and limits.
Step-by-step procedure for removing and replacing the battery.
Compares Pro Plus NDLs with U.S. Navy limits and discusses multilevel dive benefits.
Predicted exposure limits and oxygen calculations based on NOAA diving manual.
How the Pro Plus tracks twelve tissue compartments for calculating nitrogen absorption.
Represents nitrogen loading and shows no decompression or decompression status visually.
Shows oxygen loading and tolerance dosage (OTU), indicating potential oxygen exposure limits.
Visually indicates ascent speed, warning against excessive rates with color-coded segments.
Describes the different audible alerts and their meanings for potential dangers or violations.
Details the procedure to activate the Pro Plus, including diagnostic checks and calibration.
Recommends reviewing PDPS for planning dives and avoiding decompression/oxygen limits.
Explains how the Pro Plus enters No Decompression Dive Mode upon descending.
How the Pro Plus accounts for reduced NDLs at higher elevations and recalibrates depth.
How to access the PDPS to view adjusted NDLs based on previous dives.
Explains how to avoid and manage decompression using the Pro Plus.
Offers a way to monitor proximity to the No Decompression Limit visually.
Explains how the Pro Plus activates Decompression Dive Mode when limits are exceeded.
Describes the different violation modes (Conditional, Delayed, Immediate) the Pro Plus can enter.
How the Pro Plus enters this mode if ascending shallower than the required stop depth.
Conditions that cause the Pro Plus to enter delayed violation mode.
Information on managing and avoiding excessive oxygen exposure.
How the Pro Plus enters this mode when PO2 equals or exceeds 1.40 ATA.
How the O2 bar graph represents oxygen accumulation and limits.
Step-by-step procedure for removing and replacing the battery.
Compares Pro Plus NDLs with U.S. Navy limits and discusses multilevel dive benefits.
Predicted exposure limits and oxygen calculations based on NOAA diving manual.
How the Pro Plus tracks twelve tissue compartments for calculating nitrogen absorption.
General| Number of Buttons | 4 |
|---|---|
| Display Type | LCD |
| User Replaceable Battery | Yes |
| Downloadable | Yes |
| Air Integrated | Yes |
| Gas Mixes | 3 |
| Logbook Capacity | 24 dives |
| Type | Dive Computer |
| Nitrox Compatibility | Yes |
| Compass | Yes |
| Decompression Algorithm | Pelagic Z+ |
To Next Page
