Need help?Do you have a question about the Oceanic PROPLUS X and is the answer not in the manual?
Fundamental operation and key features of the ProPlus X dive computer.
Instructions for connecting and disconnecting the ProPlus X console hose.
Explanation of the various symbols and icons used on the ProPlus X display.
Details on the function and operation of the ProPlus X control buttons.
Displays personal user information entered via the Diverlog interface.
Shows ProPlus X serial number, firmware, and last calibration date.
Adjusts screen brightness and enables/disables the Auto Dim feature.
Configures the time interval and dimming degree for screen dimming.
Allows enabling or disabling the Bluetooth® feature for device pairing.
Sets the date format, date, and time of day for the dive computer.
Selects the preferred hour format (12-hour or 24-hour).
Sets the current time of day on the dive computer.
Guides through calibrating the compass for accurate readings.
Sets magnetic declination for accurate compass readings.
Accesses stored dive log information for viewing dive history.
Provides a summary of basic data recorded during all dives.
Navigates to the main screen for the Normal dive mode.
Navigates to the main screen for the Gauge dive mode.
Displays the remaining dive time based on NDL or OTR.
Explains the concept of No Decompression Limits (NDLs).
Details the Oxygen Time Remaining calculation for nitrox dives.
Describes the Tissue Loading and Ascent Rate bar graphs.
Visual representation of ascent speed and warning indicators.
Shows nitrogen loading status and decompression risk.
Explains the choice between Z+ and DSAT algorithms for calculations.
Details the safety margin adjustment for dive calculations.
Explains the function and activation of Deep Stops.
Information on setting and performing Safety Stops.
Warning and alarm indicators for low battery levels.
Details the types and triggers for audible alarms.
Displays surface information before initiating a dive in Norm mode.
Navigation menu for accessing dive data, planning, and settings.
Adjusts screen brightness for optimal visibility during a dive.
Shows essential data recorded from the most recent dive.
Provides additional detailed dive data.
Calculates dive depth and time limits based on various factors.
Configures available gas mixes, including FO2 and PO2 alarms.
Customizes various audible and visual alarm settings.
Controls the ON/OFF status of audible alarms.
Sets a maximum depth alarm to alert divers.
Sets an alarm for a predetermined dive time.
Sets an alarm based on a percentage of Tissue Loading Bar Graph fill.
Sets an alarm for a designated reserve of dive time remaining.
Sets an alarm for a designated turn pressure.
Sets an alarm for a designated end pressure.
Sets the water environment (salt or fresh) for depth calculations.
Selects preferred units of measure (Imperial or Metric).
Enables or disables the Deep Stop feature.
Configures Safety Stop duration and depth.
Chooses between Z+ or DSAT algorithms for calculations.
Enables or disables the conservative factor for safety.
Sets data snapshot frequency for PC download.
Selects items to display on the Preview screen.
Displays selected settings on the Preview screen.
Describes the process of starting a dive in Norm Mode.
Displays critical dive parameters during a no-decompression dive.
Accesses settings like brightness, more data, gas switches, and DS preview.
Adjusts screen brightness for optimal visibility during a dive.
Shows additional dive data including temperature and O2 Sat.
Guides on safely switching gas mixes during a dive.
Shows a preview of the calculated Deep Stop depth and time.
Manually records a data snapshot during a dive.
Displays Deep Stop information during ascent.
Shows Safety Stop information during ascent on a No Deco dive.
Describes the transition from dive mode to surface mode.
Explains decompression mode activation and ascent procedures.
Details the visual and audible cues upon entering decompression.
Displays stop depth and time during decompression.
Describes penalties for ascending above required decompression stops.
Explains violation penalties for remaining shallower than a stop depth.
Details violation for specific stop depths and ascent issues.
Describes the alarm and display for exceeding maximum functional depth.
Switches the unit to a digital instrument during dives with deep stops.
Explains VGM lockout and feature restrictions on the surface.
Warning and alarm conditions for high partial pressure of oxygen.
Describes PO2 reaching alarm set points and alternating displays.
PO2 alarms in decompression mode and alternating displays.
Warning and alarm levels for high oxygen saturation.
O2 SAT warning level during decompression and alternating displays.
O2 SAT alarm level during decompression and solid display.
O2 SAT alarms upon surfacing and subsequent mode changes.
Displays surface information before initiating a dive in Gauge mode.
Navigation menu for accessing dive data and settings in Gauge mode.
Describes the process of starting a dive in Gauge Mode.
Explains the icons and elements of the compass display.
Introduces the 3D digital compass and its activation.
Standard compass mode displaying the current heading.
Allows setting course headings and course correction arrows.
Details how to transfer dive data using Bluetooth or USB.
Provides instructions for cleaning and protecting the ProPlus X.
Outlines requirements for annual dealer inspections and warranty service.
Explains how the unit senses and adjusts for altitude.
No Decompression Limits based on DSAT algorithm for Imperial units.
No Decompression Limits based on DSAT algorithm for Metric units.
No Decompression Limits based on Z+ algorithm for Imperial units.
No Decompression Limits based on Z+ algorithm for Metric units.
Detailed specifications covering usage, performance, and operating parameters.
Lists the range and resolution for various numeric displays.
Glossary of abbreviations and terms used in the manual.
Fundamental operation and key features of the ProPlus X dive computer.
Instructions for connecting and disconnecting the ProPlus X console hose.
Explanation of the various symbols and icons used on the ProPlus X display.
Details on the function and operation of the ProPlus X control buttons.
Displays personal user information entered via the Diverlog interface.
Shows ProPlus X serial number, firmware, and last calibration date.
Adjusts screen brightness and enables/disables the Auto Dim feature.
Configures the time interval and dimming degree for screen dimming.
Allows enabling or disabling the Bluetooth® feature for device pairing.
Sets the date format, date, and time of day for the dive computer.
Selects the preferred hour format (12-hour or 24-hour).
Sets the current time of day on the dive computer.
Guides through calibrating the compass for accurate readings.
Sets magnetic declination for accurate compass readings.
Accesses stored dive log information for viewing dive history.
Provides a summary of basic data recorded during all dives.
Navigates to the main screen for the Normal dive mode.
Navigates to the main screen for the Gauge dive mode.
Displays the remaining dive time based on NDL or OTR.
Explains the concept of No Decompression Limits (NDLs).
Details the Oxygen Time Remaining calculation for nitrox dives.
Describes the Tissue Loading and Ascent Rate bar graphs.
Visual representation of ascent speed and warning indicators.
Shows nitrogen loading status and decompression risk.
Explains the choice between Z+ and DSAT algorithms for calculations.
Details the safety margin adjustment for dive calculations.
Explains the function and activation of Deep Stops.
Information on setting and performing Safety Stops.
Warning and alarm indicators for low battery levels.
Details the types and triggers for audible alarms.
Displays surface information before initiating a dive in Norm mode.
Navigation menu for accessing dive data, planning, and settings.
Adjusts screen brightness for optimal visibility during a dive.
Shows essential data recorded from the most recent dive.
Provides additional detailed dive data.
Calculates dive depth and time limits based on various factors.
Configures available gas mixes, including FO2 and PO2 alarms.
Customizes various audible and visual alarm settings.
Controls the ON/OFF status of audible alarms.
Sets a maximum depth alarm to alert divers.
Sets an alarm for a predetermined dive time.
Sets an alarm based on a percentage of Tissue Loading Bar Graph fill.
Sets an alarm for a designated reserve of dive time remaining.
Sets an alarm for a designated turn pressure.
Sets an alarm for a designated end pressure.
Sets the water environment (salt or fresh) for depth calculations.
Selects preferred units of measure (Imperial or Metric).
Enables or disables the Deep Stop feature.
Configures Safety Stop duration and depth.
Chooses between Z+ or DSAT algorithms for calculations.
Enables or disables the conservative factor for safety.
Sets data snapshot frequency for PC download.
Selects items to display on the Preview screen.
Displays selected settings on the Preview screen.
Describes the process of starting a dive in Norm Mode.
Displays critical dive parameters during a no-decompression dive.
Accesses settings like brightness, more data, gas switches, and DS preview.
Adjusts screen brightness for optimal visibility during a dive.
Shows additional dive data including temperature and O2 Sat.
Guides on safely switching gas mixes during a dive.
Shows a preview of the calculated Deep Stop depth and time.
Manually records a data snapshot during a dive.
Displays Deep Stop information during ascent.
Shows Safety Stop information during ascent on a No Deco dive.
Describes the transition from dive mode to surface mode.
Explains decompression mode activation and ascent procedures.
Details the visual and audible cues upon entering decompression.
Displays stop depth and time during decompression.
Describes penalties for ascending above required decompression stops.
Explains violation penalties for remaining shallower than a stop depth.
Details violation for specific stop depths and ascent issues.
Describes the alarm and display for exceeding maximum functional depth.
Switches the unit to a digital instrument during dives with deep stops.
Explains VGM lockout and feature restrictions on the surface.
Warning and alarm conditions for high partial pressure of oxygen.
Describes PO2 reaching alarm set points and alternating displays.
PO2 alarms in decompression mode and alternating displays.
Warning and alarm levels for high oxygen saturation.
O2 SAT warning level during decompression and alternating displays.
O2 SAT alarm level during decompression and solid display.
O2 SAT alarms upon surfacing and subsequent mode changes.
Displays surface information before initiating a dive in Gauge mode.
Navigation menu for accessing dive data and settings in Gauge mode.
Describes the process of starting a dive in Gauge Mode.
Explains the icons and elements of the compass display.
Introduces the 3D digital compass and its activation.
Standard compass mode displaying the current heading.
Allows setting course headings and course correction arrows.
Details how to transfer dive data using Bluetooth or USB.
Provides instructions for cleaning and protecting the ProPlus X.
Outlines requirements for annual dealer inspections and warranty service.
Explains how the unit senses and adjusts for altitude.
No Decompression Limits based on DSAT algorithm for Imperial units.
No Decompression Limits based on DSAT algorithm for Metric units.
No Decompression Limits based on Z+ algorithm for Imperial units.
No Decompression Limits based on Z+ algorithm for Metric units.
Detailed specifications covering usage, performance, and operating parameters.
Lists the range and resolution for various numeric displays.
Glossary of abbreviations and terms used in the manual.
General| Brand | Oceanic |
|---|---|
| Model | PROPLUS X |
| Category | Diving Instrument |
| Language | English |
To Next Page
