Oceanic PROPLUS X - LAST DIVE DATA; MORE DATA; PLAN

25
PROPLUS X OPERATING MANUAL
© Pelagic, 2016 Doc. No. 12-5655-r01 (8/19/16)
LAST DIVE DATA
This screen displays essential data from the last dive. If there has been no dive within the current activation cycle, the the max depth and elapsed
dive time will be displayed as zero.
NORM
LAST DIVE DATA
MAX DEPTH
DIVE TIME
= 103 FT
= 48
min
(<) BACK TO MENU
CONTROLS
to Main Menu
MORE DATA
This screen as the name implies displays more dive data.
NORM
MORE DATA
TEMPERATURE
GAS 1 FO2
ALTITUDE
GAS 1 PO2 AL
O2 SAT
DESAT TIME
TIME TO FLY
= SEA
= 39°
F
= 32%
= 1.40
= 24%
= 4:28
hr:mn
= 0:52 hr:mn
(<) BACK TO MENU
CONTROLS
to Main Menu
PLAN
This mode calculates dive depth and time limits. To do so, it accounts for any residual nitrogen, oxygen, surface intervals, the programmed gas mix,
and PO2 alarm setting. Either NDC (No Decompression) or OTR (Oxygen Time Remaining) limits are displayed, depending on whether nitrogen or
oxygen levels will be the limiting factor. The time limit will display in minutes.
NOTE: Depths exceeding the MOD (Maximum Operating Depth), if nitrox, or that have less than 1 minute allowed dive time will
not be displayed.
40 FT
50 FT
60 FT
70 FT
80 FT
90 FT
100 FT
110 FT
PLAN
DEPTHS, LIMITS
137 min
81 min
57 min
40 min
30 min
24 min
19 min
16 min
DEPTH LIMIT


(<) B ACK TO MENU
^ - UP LIST
v - DO
WN LIST
FO2 SET
32%
1.40
PO2 SET
MAX
111 FT
Z+
CONTROLS
scroll up
scroll down
to Main Menu