Oceanic Pro Plus - Alpha;Numeric Displays; Cylinder Pressure; Depth Displays; Time Displays

11
Datamax Pro Plus
ALPHA/NUMERIC DISPLAYS
Cylinder Pressure Display
The Cylinder Pressure display appears in the lower screen (Fig. 11a) any time
the Pro Plus is connected to a pressurized cylinder and in an active mode. Val-
ues of pressure are displayed from 10 PSI (.5 BAR) up to 5000 PSI (352 BAR)
in increments of 10 PSI (.5 BAR).
Depth Displays
During a dive, CurrentDepth (Fig. 11b) and Maximum Depth reached
during that dive (Fig. 11c) are displayed from 0 to 330 feet (99.5 meters) in 1
foot (.5 meter) increments.
During a Decompression Dive, the required Ceiling Stop Depth is displayed
from 60 to 10 feet (20 to 3 meters) in 10 foot (3 meter) increments.
Time Displays
Time displays (Fig. 11 d & e) are shown in hour:minute format (i.e., 1:02 rep-
resents one hour and two minutes, not 102 minutes!). An exception to this is
Decompression Stop Time that displays 0 to 99 minutes (:00 to :99).
Fig. 11 - Pressure/Depth/
Time Displays
200 5 10 30 40 50 60
NO DECO
C Z
DECO
C Z O
2
PSI
FT
FT
MAX
a
c
b
e
d