40
• S (< 2 sec) to save Set Point and access Set Time.
• S (2 sec) to revert to Set Date Format.
Set Time, information includes (Fig. 38):
> Graphic SEt
> Time of Day (hr:min), Hour digits flashing, with AM (or PM)
icon if 12 Hour Format, no icon if 24 Hour Format
• A (hold) to scroll upward through Hour Set Points at a rate
of 8 per second from 12: (AM) to 11: (PM), or 0: to 23: if
24 Hour Format, in increments of 1: (hr).
• A (< 2 sec) to step upward through Set Points one at a time.
• S (< 2 sec) to save the Hour and flash the Minute digits.
• A (hold) to scroll upward through Minute Set Points at a rate
of 8 per second from :00 to :59 in increments of :01 (min).
• A (< 2 sec) to step upward through Set Points one at a time.
• S (< 2 sec) to save the Time Set Point and access Set Date.
• S (2 sec) to revert to Set Hour Format.
Set Date, information includes (Fig. 39):
The sequence for setting date is Year, then Month, then Day,
regardless of the Date Format set.
> Month.Day (or Day.Month)
> Year flashing
> Graphics M - D (or D - M), to identify top row digits
Fig. 38 - SET TIME
Fig. 39 - SET DATE
To Next Page
