Oceanic VT Pro - Page 44

44
Setting Link Code (continued) -
• Press and release the Side (Select) button to change the
Second digit.
• Press the Front (Advance) button to accept the Second digit.
The Third digit begins to flash.
• Press and release the Side (Select) button to change the Third
digit.
• Press the Front (Advance) button to accept the Third digit.
The Forth digit begins to flash.
• Press and release the Side (Select) button to change the
Fourth digit.
• Press the Front (Advance) button to accept the Fourth digit.
The Fifth digit begins to flash.
• Press and release the Side (Select) button to change the Fifth
digit.
• Press the Front (Advance) button to accept the Fifth digit. The
Sixth digit begins to flash.
• Press and release the Side (Select) button to change the Sixth
digit.
• Press the Front (Advance) button to accept the 6 digit Code
and/or advance to Surface Mode
R
E
S
P
O
N
S
I
B
L
E
D
I
V
E
R