Oceanic VT Pro - No Deco Dive Mode - Secondary Display; No Deco Dive Mode - Safety Stop

54
No Decompression Dive Mode - Display #4 (Fig. 61)
Information includes - Current Depth, current value of PO2 (if a
nitrox dive) and PO2 graphic, Dive Time Remaining and icon,
Tank Pressure, and applicable bar graphs.
• press the Front (Advance) button to view Display #1.
No Decompression Dive Mode - Secondary Display (Fig. 62)
Information includes Current Depth, Air Time Remaining (and
Mode icon), and applicable bar graphs.
To view, press the Front (Advance) button for 2 seconds.
The Secondary Display will remain on the screen for 3 seconds
then revert back to the Main Display previously selected (#1 - 4).
No Decompression Dive Mode - SAFETY STOP (Fig. 63)
Upon ascending to 20 feet (6 meters) on any No Decompression
dive in which depth exceeded 30 feet (9 meters), a short beep
will be emitted and a Safety Stop at 15 feet (4.5 meters) will
appear on the display with a 3 minute countdown timer that
counts down from 3:00 to :00 (min:sec).
Information includes Current Depth, Stop Depth (15 feet or 4.5
meters), Stop Bar icon, Countdown Timer, Dive Time Remaining,
Cylinder Pressure, and applicable bar graphs.
Fig. 63 - No Deco Safety
Stop
Fig. 62 - No Deco Secondary
Fig. 61 - No Deco #4
FEET
ATR
5
10
20
0
PSI
O
2
FEET
ATR
5
10
20
0
PSI
O
2
FEET
ATR
5
10
20
30
0
PSI
O
2