Need help?Do you have a question about the OceanSat AIS and is the answer not in the manual?
General| Data Rate | 9600 bps |
|---|---|
| Purpose | Vessel tracking and identification |
| Transmission Power | 2W / 12.5W |
| Modulation | GMSK |
| Antenna Type | VHF Marine Antenna |
| Operating Temperature | -15°C to +55°C |
| Interface | NMEA 0183, NMEA 2000 |
Critical safety information for installation, operation, and handling of the transceiver.
Describes the transceiver's front panel, including the display, buttons, and basic operations.
Covers display layout, main screens, target lists, vessel data, messages, and alarms.
Covers unpacking, preparation, and step-by-step installation procedures for the transceiver and antennas.
Details equipment connection, sensor configuration, and initial transceiver setup.
Explains password change, operation confirmation, regional settings, and Inland AIS configuration.
To Next Page