OCULUS Go Getting Started

7/5/2019 Getting Started with your Oculus Go | Oculus Support Centre
https://support.oculus.com/183135912238400/ 13/16
Press any button to wake the controller while using Oculus Go.
Press and hold the Oculus button to reorientate the controller.
Press and hold the Oculus button and back button until the controller
LED blinks and then fully lights up to repair the controller.
Remove the battery and place it back into your Oculus Go remote.
Unpair and re-pair your Oculus Go controller:
1. Open the Oculus companion app on your phone.
2. Tap Settings from the bottom menu.
3. Tap the headset you currently have paired.
4. Tap Controller , then tap the controller you currently have paired.
5. Tap Unpair Controller .
If you continue experiencing issues with pairing or connecting your
Oculus Go controller, contact Customer Support.
Note : If your Oculus Go controller LED does not light up, you may
need to replace the controller battery.
From Home on your Oculus Go, you can navigate the store, access
content and control basic settings and features.
Was this answer helpful?
Permalink
Yes No
How do I use the toolbar menu in VR on Oculus Go?

OCULUS Go Specifications

General

Refresh Rate	60 Hz, 72 Hz
Processor	Qualcomm Snapdragon 821
RAM	3GB
Storage Options	32GB, 64GB
Tracking	3DoF (Degrees of Freedom)
Release Date	May 1, 2018
Discontinued	2020
Operating System	Oculus OS (based on Android)
Controller	Oculus Go Controller (3DOF)
Platform	Oculus Store
Audio	3.5mm headphone jack
Connectivity	Wi-Fi 802.11ac, Bluetooth 4.1
Battery Life	2-2.5 hours
Weight	468g
Display	5.5-inch fast-switch LCD
Field of View	Approximately 100 degrees