OCULUS Go Getting Started

7/5/2019 Getting Started with your Oculus Go | Oculus Support Centre
https://support.oculus.com/183135912238400/ 7/16
2. Tap Settings from the bottom menu.
3. Tap the headset you currently have paired.
4. Tap Controller , then tap the controller you currently have paired.
5. Tap Unpair Controller .
Once your controller has been paired, you can use your controller
to interact with apps and games. Using the buttons on your
controller, you can do the following :
Trigger : Press to select things
Touchpad : Press to select things or swipe to browse
Back button : Press to go back to the previous screen or menu
Oculus button : Press to go back to Oculus Home or press and hold to
reset your controller orientation
Press any button to wake the controller after you've turned on your
headset
To remove the battery from your Oculus Go controller :
1. Remove the battery cover of your controller by lightly pulling
at the bottom half of the controller until it comes loose.
2. Lightly pull on the battery from the bottom end of the
controller until it comes loose and can be removed.
If you're looking for information on prescription lens inserts for your
Oculus Go, visit FramesDirect to learn more.
Before you wear your Oculus Go with glasses, check to make sure that
the width and height of your frames match the following
measurements:
Was this answer helpful?
Permalink
Yes No
How do I wear glasses while using my Oculus Go?

OCULUS Go Specifications

General

Refresh Rate	60 Hz, 72 Hz
Processor	Qualcomm Snapdragon 821
RAM	3GB
Storage Options	32GB, 64GB
Tracking	3DoF (Degrees of Freedom)
Release Date	May 1, 2018
Discontinued	2020
Operating System	Oculus OS (based on Android)
Controller	Oculus Go Controller (3DOF)
Platform	Oculus Store
Audio	3.5mm headphone jack
Connectivity	Wi-Fi 802.11ac, Bluetooth 4.1
Battery Life	2-2.5 hours
Weight	468g
Display	5.5-inch fast-switch LCD
Field of View	Approximately 100 degrees