OCULUS Go Getting Started

7/5/2019 Getting Started with your Oculus Go | Oculus Support Centre
https://support.oculus.com/183135912238400/ 6/16
The Oculus Go controller is a motion controller you can use to
interact with apps and games on your Oculus Go. Before you can start
using the controller, you'll need to download the Oculus app, connect
your headset to Wi-Fi and pair the controller with your Oculus Go.
To pair your controller :
1. Download the Oculus app and follow the on-screen instructions to
connect your Oculus Go to Wi-Fi.
2. Insert the included battery into your controller, then tap Continue in the
Oculus app.
3. Hold the Oculus and Back buttons on your controller until the controller
LED blinks and then lights up.
4. In the Oculus app, tap Left or Right to choose which hand you'd like to
use, then tap Continue to fi nalise the pairing.
You can change which hand you'd like to use by selecting
Handedness from the controller settings menu in the Oculus app.
Once you've paired your Oculus Go controller, the controller will
automatically connect to your headset each time you turn it on, if it's
nearby.
To unpair your controller :
1. Open the Oculus app on your phone.
Was this answer helpful?
Permalink
Yes No
How do I use the Oculus Go controller?

OCULUS Go Specifications

General

Refresh Rate	60 Hz, 72 Hz
Processor	Qualcomm Snapdragon 821
RAM	3GB
Storage Options	32GB, 64GB
Tracking	3DoF (Degrees of Freedom)
Release Date	May 1, 2018
Discontinued	2020
Operating System	Oculus OS (based on Android)
Controller	Oculus Go Controller (3DOF)
Platform	Oculus Store
Audio	3.5mm headphone jack
Connectivity	Wi-Fi 802.11ac, Bluetooth 4.1
Battery Life	2-2.5 hours
Weight	468g
Display	5.5-inch fast-switch LCD
Field of View	Approximately 100 degrees