Never touch wine rope or hook while
in tension.
Be certain the anchor you select will
withstand load.
Never wrap wire rope back onto
itself. Use a choker chain or tree
trunk protector on the anchor.
Prior to initiating winching operation
be sure any element which can
interfere with safe winching is
removed.
Take your time. Sloppy rigging
causes accidents.
Do not disengage clutch if winch is
under load or wire rope is in tension.
The wire rope must always spool
onto the drum as indicated by he
drum rotation label on the winch.
CAUTION:
To avoid injury and property
damage:
Do not use winch to secure a load
during transport.
Do not submerge in water.
Do not use to tow other vehicles. Wear
heavy leather gloves when handling the
wire rope.
Never winch with less than 5 wraps of
wire rope around the drum. Caution
should be used if the vehicle is tied
down during a winching operation. This
may lead to damage to the frame.
Before winching, inspect remote
control lead for damage.
(18)LH Brake Lever
When the LH brake lever is pressed
the front and rear brakes are applied.
When released the brake lever
should automatically return to its
original position.
Braking effect is proportional to the
force applied on the lever.
NOTE: As on other wheeled vehicles
the vehicle weight is transferred to
the front wheels when braking. To
obtain greater stopping efficiency,
the brake system distributes more
braking force to the front wheels.
This will affect vehicle handling and
steering control when braking
vigorously. Take it into account when
braking.
TYPICAL
1. Brake lever
2. To apply brakes
To Next Page
Loading...
