9
Sleep Button
Press and purier will run on the lowest fan speed.
Fan Speed Button
Press to adjust fan speed from 1 (low) to 5 (high).
UV Lamp Button
Press and UV lamp will turn on/off.
Air Quality Display/Light Ring
Displays the air quality. The lower the number, the cleaner the air.
The light ring around the control panel changes color as follows:
Good: Blue (<75), Moderate: Yellow (76-115), Polluted: Purple (116-
150), Bad: Red (>151).
The Particle Matter (PM) 2.5 sensor measures air quality after the
purier has been running for 30 seconds. This should not be used
as a professional indoor air quality instrument.
This User Guide is available to download from odorstop.com:
www.odorstop.com/content/user-guides/OSAP5-User-Guide.pdf
9
10
11
12
To Next Page
Loading...
