OEG EcoComfort - Operating Modes and Settings; Temperature and Time Control Modes

33EcoComfort
. Operating modesSetting the operating mode
.. Operating mode: Temperature-controlled
The pump is controlled by means of a temperature sensor. The pump
stops when the temperature of the drinking water reaches °C and
runs at constant speed at a temperature of °C.
LED () and LED () are on. Display () indicates the current power
consumption in watts.
.. Operating mode: Time-controlled
The pump runs at constant speed at set times.
. Flushing function
After  hours of standby, the pump is automatically operated with
constant speed to flush the pipe. The flushing function only works in
the temperature- and time-control modes. It does not work in other
operating modes. LED  is on and LED  flashes and indicates the
current power consumption in watts.
. Setting the operating mode
In factory setting, the pump is operated at constant speed. After the
pump has been switched on, please press button  briefly to select
the appropriate operating mode (The following operating modes are
available: Constant Speed  AUTO  Temperature Control  Time
Setting).
High-efficiency drinking water circulation pump
GB