OEG EcoComfort - Technical Specifications; Key Product Characteristics

37EcoComfort
. Operating modesSetting the operating mode
Checking the time setting in the mode “Time control“:
By pressing button  for  seconds, you activate the verification
function for the time setting. The current time (F) is indicated. The
digits for hour and minute set by the user are shown alternately and
the LED is on at the same time. Push button  briefly and the F-
mode is available. This procedure also applies to the other values.
By pressing button  for  seconds, you can quit this mode
. Technical Data
.. Characteristics
High-efficiency drinking water circulation pump
GB
Voltage supply  V
Motor protection No external protection required.
Protection class IP
Insulation class F
Max. relative humidity Max. 
Max. pressure . MPa
Inlet pressure Liquid temperature Min. inlet pressure
  °C . MPa
  °C . MPa
EMC Standard EN--, EN--, EN-, EN-
Noise emission class Less than  dB (A)
Ambient temperature  -  °C
Temperature class TF
Drinking water temperature  up to  °C