Ofil luminar - Display Mode Selection

19
9. MODE
• Display modes: COMBINED | UV | VISIBLE
•
COMBINED - both visible & UV spectral
ranges are deployed
•
VISIBLE - only the visible spectral range
is deplyed - no corona
• UV - if corona is detected it will be
displayed, else the display is black
• Select the
SETTINGS icon
• Select the
DISPLAY button
• Click on the SELECTOR to open a list
• Move the green frame to a mode
• Click on the
SELECTOR to enable the
selected mode, move to
OK and click
on the
SELECTOR to save and leave
• Move to EXIT and click on the SELECTOR
• The
OSD bottom status line will display:
Combine or Visible or UV
mode