To Next Page
R
Rachael TaylorAug 17, 2025
What to do if OHAUS Scales show Err 8.3?
- TTravis ByrdAug 17, 2025
If your OHAUS Scales display 'Err 8.3', it means the weight on the pan exceeds the capacity. Remove some weight from the pan to resolve this issue.
What to do if OHAUS Scales show Err 8.3?
If your OHAUS Scales display 'Err 8.3', it means the weight on the pan exceeds the capacity. Remove some weight from the pan to resolve this issue.
What to do if OHAUS Scales show Err 8.1?
If your OHAUS Scales display 'Err 8.1', it indicates that the pan had a load during power on. Remove the weight from the pan and re-zero the scales.
What to do if OHAUS Scales show Err 8.2?
If your OHAUS Scales display 'Err 8.2', it means the pan was removed prior to power on. Install the pan and re-zero the scales.
What to do if OHAUS Carat PAJ603 Scales show Err 8.4?
If your OHAUS Scales display 'Err 8.4', it means the pan was removed during weighing. Re-install the pan to resolve this issue.
How to fix OHAUS Scales that cannot turn on?
If your OHAUS Scales display 'Cannot turn on', the issue is likely due to no power reaching the balance. Verify the connections and voltage.
What does Err 5 mean on OHAUS Carat PAJ603 and how to fix it?
If your OHAUS Scales display 'Err 5', it indicates that the Average Piece Weight is too small. Add additional samples to resolve this issue.
What to do if OHAUS Carat PAJ603 show Err 9.8?
If your OHAUS Scales display 'Err 9.8', it means the factory calibration data is corrupted. Perform calibration to resolve the issue.
Why are my OHAUS Carat PAJ603 showing poor accuracy?
If OHAUS Scales show 'Poor accuracy', this could be due to improper calibration or an unstable environment. You should perform a calibration and move the balance to a more suitable, stable location.
Why OHAUS Carat PAJ603 Scales cannot calibrate?
If your OHAUS Scales display 'Cannot calibrate', it may be due to an unstable environment or incorrect calibration masses. Move the balance to a suitable location and use the correct calibration masses.
What does REF Err mean on OHAUS Scales?
If your OHAUS Scales display 'REF Err', it means the Reference Weight is too small. Add additional samples.
General