Need help?Do you have a question about the OHAUS JS500 and is the answer not in the manual?
Essential safety guidelines for operating the balance, including cautions.
Explains the primary and secondary functions of the balance's ON/ZERO and PRINT/Unit buttons.
Guide to understanding the balance's menu structure and navigation.
Instructions for accessing the balance's main menus like CAL, SETUP, UNITS, and END.
Detailed steps for accessing and configuring the SETUP menu options.
Guide to configuring measurement units, parts counting, and other settings.
Explains the standard and enhanced modes available for parts counting.
Detailed steps for performing standard parts counting using a reference quantity.
Detailed steps for enhanced parts counting, allowing additional parts to be added.
Steps for performing span calibration using zero and a specified calibration weight.
Instructions for performing linearity calibration using three calibration points.
How to set a reference weight for percentage calculations.
Solutions for common balance problems, including display, battery, and reading errors.
Explanations and remedies for various error codes displayed by the balance.
To Next Page
General