Need help?Do you have a question about the OHAUS VOYAGER and is the answer not in the manual?
Overview of the service manual's scope and content for Ohaus balances.
Guidelines for selecting an appropriate and safe environment for servicing the balance.
Lists special and standard tools required for servicing Ohaus Explorer balances for effective repairs.
Specifies required test masses adhering to ASTM Class 1 Tolerance for accurate balance calibration.
Details the critical performance specifications that serviced Ohaus Explorer balances must meet.
Guide to identifying and isolating balance problem areas through systematic diagnosis using tables and error codes.
Provides a structured approach to problem diagnosis by matching symptoms to probable causes and recommended remedies.
Lists Explorer/Voyager balance error codes, their probable causes, and suggested remedies for troubleshooting.
Details error codes specific to Explorer Pro balances, outlining their causes and appropriate resolution steps.
Comprehensive procedures for the disassembly, assembly, and replacement of load cells and associated balance components.
Step-by-step instructions for replacing key parts such as printed circuit boards, display modules, and switches.
Covers essential operational checks, segment display tests, and warm-up procedures before performance testing.
Details four key performance tests to verify balance accuracy and adherence to specifications after service.
Explains the coding system used for identifying and ordering serviceable parts illustrated in exploded views.
Comprehensive lists of all replaceable parts for various Ohaus Explorer, Voyager, and Explorer Pro balance models.
Outlines system requirements, installation steps, and necessary connections for the Explorer EP Loader software.
Guides users through the process of downloading, saving, opening, and clearing data using the EP Loader utility.
Specifies system requirements and installation procedures for the Explorer Pro EP Loader software.
Details the operation of the EP Loader for Explorer Pro, including data management and download processes.
Steps for preparing the balance for production mode calibration by entering a specific operational state.
Instructions for performing MFG and MFgWt calibrations to restore internal weight calibration factors.
Detailed instructions for the physical replacement of the bottom display board on specific balance models.
Guide on loading flash bank files onto the display board after replacement using specialized software.
To Next Page
General