FOUR > TECHNICAL INFORMATION
40
PROGRAMMING MENU
Use the programming menu to change the display from kph to mph
and to enter the time:
1 > Hold both (Crono) and (Mode) down for a few seconds until four
zeros appear at the bottom left corner of the screen. The first zero is
blinking.
2 > Press on (+A) to go from 1 - 9 and on (–G) to go from 9 - 1. When
the correct digit is displayed, press on (Mode) to pass to the next digit.
3 > When the fourth digit is chosen, press on (Mode) to access the
selected programming menu options:
a. Menu 2001: kph or mph
When you access this menu, press on (+A) or (–G) to change the
unit. Once the right unit is selected, press on (Mode) to go back
to the regular display.
b. Menu 2004: Time programming
Follow steps (2) and (3) above to enter the time.
ASSISTANCE & GENERATION
ASSISTANCE
Four assistance levels multiply your pedaling effort by 25%, 50%,
100% or 200%(or 300%), allowing you to ride faster while giving the
same effort (or to ride at the same speed with less effort). To select
the assistance mode, simply press (+A) to increase from levels 1
– 4 and then (–G) to reduce from levels 4 – 1. The assistance is
proportional to your effort.
Table 1: Shows examples of assistance modes to select
depending on the riding conditions
Assistance
For a given condition,
multiplies your effort by:
Terrain
250 watts 350 watts
1 25% 35% Flat ground
2 50% 75% Slopes; front wind;
cancels the bike’s weight
3 100% 150% Steep hill, strong head
wind
4 200% 300% Very steep road
Generation
-1 Recharge Downhill or backwind;
recharge on flat ground
-2 Recharge Fitness mode – less
aggressive; recharge on
flat ground
-3 Recharge Fitness mode aggressive
-4 Recharge Fitness mode difficult
Generative brake
Recharge Steep downhill or braking
To Next Page
Loading...