2
© Ohmic Instruments Company
2004
All rights reserved. This manual may not be reproduced in complete form without written permission of Ohmic Instruments
Company. Test forms may be copied as required by the original purchaser of the instrument. Information contained in this
manual is believed to be accurate and reliable; however, no responsibility is assumed by Ohmic Instruments Company for its
use. Ohmic reserves the right to supply its instruments with design changes and/or component substitutions that may not be
documented in this manual.
DT1-10_MANUAL.PUB Rev. 2 8/3/04 JN
To Next Page
Loading...