13
STEP 4. Using a level and the provided jacking bolts in the base frame, adjust the Pod until it is level from front to back,
side to side, and top to bottom.
Check to ensure it is square to any adjacent rear or side walls.
STEP 5. If the order contains multiple pods, Locate Pod-2 and remove and appropriately dispose of the freight packaging.
STEP 6. Using a suitable hand pallet truck, position Pod-2 to the right of Pod-1 so that the spill transport pallets are square
and flush next to one another.
See Figure 5 and Figure 6.
STEP 7. Using a level and the provided jacking bolts in the base frame, adjust the Pod until it is level from front to back,
side to side, and top to bottom,and square with the adjacent Pod
FIGURE 5: Pod-2 Placement FIGURE 6: Final Pod Positioning
CAUTION!
ALWAYS keep hands and feet clear of mating and moving parts when moving the Pods into position.
To Next Page
Loading...