EasyManua.ls Logo

OilSafe Advanced Bulk System - Replacement Parts

Default Icon
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Lubrication Work Center
36
Replacement Parts
Tank Desiccant Air Breather (Part # 095Z134)
This is the air filter on the top of the tanks. When the colored beads on the inside of the breather turn from orange to dark
green, it is time to replace thefilter. The filter can be screwed on and off.
Tank Level Gauge (30G / 65G / 120G / 240G) Top Mount, Mechanical Float
The Tank Level Gauge is located at the top center of each tank. It can be removed and replaced by screwing it on or off.
Direct Mount Overfill Alarm
This is optional equipment signals if your tank is overfilling. This is an alarm which combines audible alarm and a flashing
light. These alarms are fitted to the Tank Level Gauge located on the top of every tank.
The alarm has a 9-Volt lithium battery in the Alarm Box. It should be replaced at least once per year. Battery life is shortened if
the unit is left in alarm mode for extended periods of time. See Figure 25.
FIGURE 25: Overfill Alarm