|
User’s Guide: English 33
Emulations
Available Emulations
Your printer has three emulations:
• Epson
®
FX (ESC/P)
• IBM
®
Proprinter III (PPSII) — factory setting
• OKI DATA
®
MICROLINE
®
Standard
Changing Emulations
1 Make sure paper is loaded.
2 Press SHIFT + SEL. The printer enters the Menu Mode.
3 Press LF. The following line prints:
Printer Control Emulation Mode IBM PPR
4 Press TEAR consecutively until the emulation you wish to
select prints in the right-hand column.
5 Press SHIFT + SEL to save your setting and exit the Menu
Mode.
To Next Page
Loading...
