8 Microline 320/321 Turbo
|
Saving Money
Saving Money: Forms Tear-Off
The Forms Tear-Off feature allows a printed page (rear feed,
continuous form) to be torn off without wasting paper or
adjusting the printer.
Forms Tear-Off automatically moves the paper from the
initial printing position (print start position) to the tear-off
position, after a time interval (which you select through the
menu).
The top of the page (perforation) is even with the tear bar.
The tear bar is located under the clear top of the access cover.
Paper remains in the tear-off position until the printer
receives more data. Then, the paper moves back down for
printing (retracts to the initial print position).
When printing stops, the paper will advance to the tear-off
position.
This feature is normally turned off.
Forms Tear-Off and the Top of Form settings interact.
For more information, refer to “Using Your Printer, Forms
Tear-Off and Using Your Printer, Top of Form.”
Saving Money: Draft Mode
When printing drafts of documents, use either the High Speed
Draft or Super Speed Draft mode. These modes use less ink
than the Utility or Near Letter Quality Modes, thus extending
the life of your ribbon. The draft modes also print at high
speeds, reducing the time required to complete a print job.
For more information, refer to “Using Your Printer, Print
Quality.”
To Next Page
Loading...
Need help?
General
