Oki 390 - Emulations

64 Microline 390/391 Turbo
|
Emulations
Available Emulations
Your printer has three emulations:
• Epson
®
LQ — factory setting
• IBM
®
Proprinter
• IBM
®
AGM
Changing Emulations
1 Make sure paper is loaded.
2 Press SHIFT + SEL. The printer enters the Menu Mode.
3 Press LF. The following line prints:
Printer Control Emulation Mode EPSON LQ
4 Press TEAR consecutively until the emulation you wish to
select prints in the right-hand column.
5 Press SHIFT + SEL to save your setting and exit the Menu
Mode.