Oki 42625502 - User Manual

1 page

Save Page as PDF

Warning!

If the printer has recently been powered on, some

fuser components will be very hot. Handle the fuser

with extreme care, holding it only by its handle, which

will only be mildly warm to the touch. A warning

label clearly indicates the area. If in doubt, switch

the printer off and wait at least 10 minutes for the

fuser to cool before opening the printer cover.

1. Press the cover release and open the printer's top cover fully.

2. Pull the two blue fuser lock levers (1) towards the front of the printer.

3. Holding the fuser by its handle, lift the fuser out of the printer. If the fuser is still

warm, place it on a flat surface which will not be damaged by heat. After letting

the fuser cool down, discard it.

5. Push the orange transport lock (1) to the left to release it (SNAP!), then

remove the transport lock.

6. Holding the new fuser by the handle, with the fuser pressure release lever

(1) on the right, lower the fuser into the priner.

7. Push the two blue retaining levers (1) toward the rear of the printer to lock

the fuser in place.

8.Close and latch the top cover.

①

58368302

①

4. Remove the new fuser from its packaging, then remove any packing tape.

Fuser Replacement for Oki 42625501 & 42625502

C3200/5150/C5200/C5400 Printers

Fuser Instructions

Questions and Answers

P
Patricia HobbsAug 30, 2025
How to fix 'INSTALL PAPER CASSETTE 440: TRAY 1 OPEN' error on Oki Printer?
- J
  James ValentineAug 30, 2025
  If your Oki Printer shows 'INSTALL PAPER CASSETTE 440: TRAY 1 OPEN', ensure that Tray 1 is correctly installed and pushed fully into the printer.
M
Meredith HardinAug 31, 2025
What does 'LOAD mmm AND PRESS ONLINE SWITCH 490: MP TRAY EMPTY' mean on my Oki 42625502 Printer?
- L
  Lauren StewartAug 31, 2025
  If your Oki Printer displays 'LOAD mmm AND PRESS ONLINE SWITCH 490: MP TRAY EMPTY', it means a print job from the MP Tray has been received but the tray is empty. Load the requested media (mmm) into the MP Tray and press ON-LINE.
J
Jonathan ArmstrongAug 25, 2025
How do I fix a toner sensor error on my Oki 42625502?
- G
  Gary JenkinsAug 25, 2025
  To resolve a TONER SENSOR ERROR on your Oki Printer, open the top cover and confirm that the indicated toner cartridge is present and correctly seated: C = Cyan, Y = Yellow, M = Magenta, K = Black.
G
George WilsonSep 1, 2025
What does 'PRESS ONLINE SW INVALID DATA' mean on my Oki 42625502?
- L
  logan64Sep 1, 2025
  If your Oki Printer displays 'PRESS ONLINE SW INVALID DATA', press the ON-LINE button. Then, reprocess and resend the print job.
S
Steven JohnsonSep 1, 2025
How to fix blurred print (letter edges) on Oki 42625502?
- K
  Karen HernandezSep 1, 2025
  If the print on your Oki Printer is blurred (letter edges), the LED may be dirty. Clean the LED with lens cleaner or a soft tissue.
J
Joseph WallSep 2, 2025
What to do if Oki Printer cannot print desired color because toner is low?
- C
  Courtney HuffSep 2, 2025
  If you cannot print the desired color on your Oki Printer because the toner is low, replace the toner cartridge.
S
sabrinamartinSep 2, 2025
How to resolve blurred print (one side of page) on Oki Printer?
- J
  jacksonallenSep 2, 2025
  If your Oki Printer produces blurred print on one side of the page, the top cover might not be properly closed. Press the cover release latch, open, and then close the cover.
A
alicodySep 3, 2025
What if toner cartridges are not seated properly in Oki 42625502 Printer?
- J
  Jason TrevinoSep 3, 2025
  If one or more toner cartridges are not seated properly in your Oki Printer, open the top cover and ensure each toner cartridge is fully seated and that each toner cartridge lock lever is pushed all the way back.
S
Steven AriasSep 3, 2025
Why is my Oki 42625502 printing with fading in patches?
- L
  lriosSep 3, 2025
  If you notice fading in patches on your Oki Printer, the paper may be moist. Store paper within specified temperature and humidity levels.
P
Peter BrownSep 4, 2025
How to fix vertical fading on Oki 42625502?
- A
  Amy BurnsSep 4, 2025
  If your Oki Printer is producing vertically faded prints, the LED head may be dirty. Clean the LED head with lens cleaner or soft tissue.