EasyManua.ls Logo

Oki 42625502 - User Manual

Oki 42625502
1 page
Print Icon
Loading...
Warning!
If the printer has recently been powered on, some
fuser components will be very hot. Handle the fuser
with extreme care, holding it only by its handle, which
will only be mildly warm to the touch. A warning
label clearly indicates the area. If in doubt, switch
the printer off and wait at least 10 minutes for the
fuser to cool before opening the printer cover.
1. Press the cover release and open the printer's top cover fully.
2. Pull the two blue fuser lock levers (1) towards the front of the printer.
3. Holding the fuser by its handle, lift the fuser out of the printer. If the fuser is still
warm, place it on a flat surface which will not be damaged by heat. After letting
the fuser cool down, discard it.
5. Push the orange transport lock (1) to the left to release it (SNAP!), then
remove the transport lock.
6. Holding the new fuser by the handle, with the fuser pressure release lever
(1) on the right, lower the fuser into the priner.
7. Push the two blue retaining levers (1) toward the rear of the printer to lock
the fuser in place.
8.Close and latch the top cover.
58368302
4. Remove the new fuser from its packaging, then remove any packing tape.
Fuser Replacement for Oki 42625501 & 42625502
C3200/5150/C5200/C5400 Printers
Fuser Instructions

Questions and Answers

  • R
    Roger PrattSep 4, 2025
    What to do if Oki 42625502 Printer says toner is low?
    • K
      kimberly52Sep 5, 2025
      If your Oki Printer indicates that the toner is low, change the toner cartridge.
  • W
    William MillerSep 5, 2025
    Why is my Oki 42625502 Printer printing light?
    • N
      Nancy FitzpatrickSep 5, 2025
      If your Oki Printer is producing light prints, the toner cartridge may be incorrectly installed. Reinstall the toner cartridge.
  • M
    Michael PerrySep 5, 2025
    What to do if the paper is moist or unsuitable for my Oki 42625502?
    • S
      Steven JonesSep 6, 2025
      If the paper is moist or unsuitable for your Oki Printer, store the paper within specified temperature and humidity levels and use recommended paper.
  • A
    Alexandra CastroSep 6, 2025
    Why is my Oki Printer printing black, vertical lines?
    • K
      Kathryn GriffinSep 6, 2025
      If your Oki Printer is producing black, vertical lines, the image drum may be damaged. Replace the image drum.
  • A
    Anita GonzalesSep 7, 2025
    Why is my Oki Printer printing periodic black lateral lines or spots?
    • D
      Diane RobertsSep 7, 2025
      If your Oki Printer is producing periodic black lateral lines or spots, the green surface of the image drum might be damaged or dirty. If damaged, replace the image drum cartridge. If dirty, gently wipe the image drum with soft tissue. If the lines or spots occur at intervals of approximately 113 mm, the fuser roller is damaged; change the fuser.
  • R
    Roberta WatkinsSep 7, 2025
    What happens if the image drum of my Oki Printer has been exposed to light?
    • K
      Katherine DavisSep 7, 2025
      If the image drum of your Oki Printer has been exposed to light, remove it from the printer and store it in a dark place for several hours. If this doesn't work, replace the image drum.

Oki 42625502 Specifications

General IconGeneral
Device TypeToner Cartridge
Product TypeToner cartridge
ColorYellow
Yield6000 pages
Page Coverage5%

Related product manuals