Oki B 6200 - User Manual

Other manuals for Oki B 6200

User Manual32 pages

Safety Information28 pages

Questions and Answers:

R
Rebecca BowenAug 20, 2025
Why is my Oki Printer not printing?
- B
  Bonnie ThompsonAug 20, 2025
  If your Oki Printer isn't printing, first, ensure the correct IP address is set. If LPD spool is set to Memory, and a single print file exceeds the receiving capacity, split the file into smaller parts. If multiple files exceed the limit, reduce the number of files sent at once. For an irrecoverable error, try turning the printer off and then on again. If the print data format is different, disable the Ctrl-D output function.
C
Crystal HerreraAug 22, 2025
What to do if Oki B 6200 Printer is not printing?
- M
  Mary NunezAug 22, 2025
  If your Oki Printer isn't printing, and it's processing instructions from other computers in non-spool mode, wait until it finishes or switch to spool mode. If the printer has reached the maximum number of connections, wait and resend the print job, or increase the Maximum Sessions value in the config.txt file and reboot the printer.
M
Michael CarpenterAug 25, 2025
How to fix Oki B 6200 Printer network error?
- P
  Paula BeckAug 25, 2025
  To fix a network error that prevents your Oki Printer from printing, make sure the printer is connected to the same network as your computer. If there's a network issue between your computer and the printer, ask your network administrator to investigate. Also, ensure the printer is turned on after you send the print job. Note that if multiple computers send print jobs simultaneously, the printing will be reprocessed automatically.
V
victoria77Aug 27, 2025
Why is my Oki Printer not printing even when connected?
- H
  hannah63Aug 27, 2025
  If your Oki Printer isn't printing, ensure the network component is compatible with the frame type. Set the frame type to match the file server you're connecting to. If there's a network breakdown, switch the network cable. Re-send print jobs to a queue correctly registered with the user/group name, or register the user/group name using NWADMIN. Use PCONSOLE to set jobs to Yes. Check operator flags for print queue recognition using NWADMIN. Re-send jobs to a queue with registered user/group info, or register them using NWADMIN. Ensure the print queue is assigned to the printer and doesn't exceed the maximum supported queues. Set up the slave file server using PCONSOLE.
M
Mrs. Mary ColonAug 28, 2025
How to obtain desired print results from Oki B 6200 Printer?
- S
  Sara YoungAug 28, 2025
  To get the desired print results from your Oki Printer, ensure the print language specified matches the language of the print data. Also, use the printer driver that came with the printer. If you use a driver from another company, the printer might not print correctly.
P
phooverAug 30, 2025
How to get desired print results if Oki Printer is printing wrong?
- C
  Crystal RobinsonAug 30, 2025
  To get the desired print results from your Oki Printer, set the same print language for both the print job and the printer.
J
Jennifer LuceroAug 31, 2025
Why is Oki B 6200 Printer connected but not printing?
- U
  usmithAug 31, 2025
  If your Oki Printer is connected but not printing, first, press the button. If that doesn't work, and the print languages of the printer and driver differ, set them to the same language.
R
Robyn BowmanSep 2, 2025
Why is my Oki B 6200 Printer not found?
- C
  Crystal DavenportSep 2, 2025
  If your Oki Printer is not found, make sure the transport protocol is the same for both the client computer and the printer. If there are multiple browsers, set the Auto Master Mode in the config.txt file to Off and reboot the printer. If the printer and client computer are on different networks, contact your system administrator. Check the config.txt file settings (WINS Primary Server, WINS Secondary Server, Subnet Mask) against the client computer settings. If the host name already exists, change it in the config.txt file or reset the printer settings.
S
Steven RodriguezSep 4, 2025
How to delete documents from Oki B 6200 window?
- C
  christina15Sep 4, 2025
  If you can't delete documents from the Oki Printer window, select the document and choose 'Cancel Printing' from the Document menu. Note that deleting all documents is only for the printer administrator. If you are not the owner of the document, log in to Windows using the owner's name. If you're using Windows NT 4.0, make sure Service Pack 3 or above is installed.
J
Justin FosterSep 6, 2025
Why can't I perform auto driver downloading on Oki B 6200?
- J
  johndavidSep 6, 2025
  If you can't perform auto driver downloading on your Oki Printer, make sure Auto Driver Download is enabled in the config.txt file, and then reboot the printer. Also, ensure the correct printer driver is saved, and then reboot the printer. The printer driver should be saved inside a folder within two levels from the drivers’ folder. The folder name should have eight alphanumeric characters.