30
Printing Using Fonts and Forms
Using Forms (Macros/Overlays)
Important!
The examples below are provided to help guide you through the process
of using commands to employ downloaded fonts and forms in printed
documents. Using commands requires experience with PCL5 programming
language and an understanding of embedding the commands.
Example 2
To set Code 3 of 9 as a Secondary font:
<ESC>%-12345X@PJL ENTERLANGUAGE=PCL<0D><0A>
<ESC>)0Y<ESC>)s18v94T
<0F>
<20><20>1-23456<20><20><0E>1-23456
<0F>
<20><20>1-65432<20><20><0E>1-65432<0D><0A>
<0C>
ESC%-12345X
Command ASCII Hexadecimal
Macro ID <ESC> & f # Y 1B 26 66 # 59
Macro Control <ESC> & f 4 X 1B 26 66 34 58
To Next Page
Loading...
