How to fix input jam on Oki Printer?
To address an INPUT JAM error on your Oki Printer: * Remove the paper tray from the printer. * Remove any crumpled or folded paper. * Remove any paper from the underside of the printer. * Replace the paper tray. After these steps, the printer should continue printing.
How to resolve feed jam or exit jam on Oki Printer?
To resolve a FEED JAM or EXIT JAM on your Oki Printer: 1. Remove the tray and clear any misfed sheets. 2. Open the top cover. 3. Carefully lift out the image drum, complete with the toner cartridge, being careful not to touch or scratch the green drum surface. 4. Remove any jammed sheets from the paper path. 5. Re-install the image drum complete with toner cartridge, ensuring that it correctly locates into the slots on each side of the printer. 6. Close the top cover and press down to latch it closed. The printer will warm up and commence printing when ready. The page lost through the jam will normally be reprinted.
What to do if my Oki Printer prints blank sheets?
If your Oki Printer is printing blank sheets, it could be due to the image drum cartridge not being properly installed. Try reinstalling the image drum cartridge. Alternatively, the toner cartridge may be empty or missing. If so, install a new toner cartridge.
Why does my Oki Printer have faded print?
Faded print on your Oki Printer can occur if the toner cartridge is not correctly installed or if the toner is low. To resolve this, correctly install the toner cartridge or replace it with a new one.
Why is my Oki Printer printing garbage?
If your Oki Printer is printing garbage, it may be due to an incorrect cable configuration. Check the cable configuration, continuity, and length.
Why does my Oki Printer print pages that curl excessively?
Excessive curling of pages from your Oki Printer can be caused by several factors: * Printing on the wrong side of the paper. Turn the paper over in the tray, noting the arrow on the paper package, and install the paper print side down. * Moisture in the paper due to improper storage. Avoid storing paper in areas of excessive temperature and humidity and store paper in protective wrapping. * High humidity. The recommended operating humidity is 20-80%.
Why is the print darker than usual on my Oki Printer?
If the print on your Oki Printer is darker than usual, the darkness setting may be too high. Try changing the darkness setting to a lower level.
Why is my Oki Printer printing garbled?
If your Oki Printer is printing garbled output, it is possible that an incorrect driver is installed. Try installing an appropriate driver for your printer model.
What causes a page to have a grey background when printing with Oki Printer?
A grey background on pages printed from your Oki Printer is often caused by static electricity, generally from dry environments, which causes toner to stick to the background. To resolve this, change the paper to a smoother laser bond or use a humidifier to increase the humidity in the room.
Why is my Oki Printer printing smeared or blotched prints?
Smeared or blotched prints from your Oki Printer can be caused by dirty rollers, toner dropped inside the printer, or an image drum problem. Replace the image drum and toner.
General| Product Type | Print Server |
|---|---|
| Manufacturer | Oki |
| Model | B4300 |
| Network Protocol | TCP/IP |
| Operating Systems Supported | Windows, Mac OS |
To Next Page
