6
INSTALL THE PRINTER DRIVER
Before you start the install, be sure the USB cable is
connected to your printer and PC, and your printer is
powered off.
1. Turn the printer on.
2. Found New Hardware Wizard displays. Click Next.
3. Select Search for Suitable Driver for my device.
Click Next.
4. Select Specify a location. Clear other selections.
Click Next.
5. Insert the CD into your CD-ROM drive.
6. Click Browse. Browse to your CD-ROM drive\
Drivers\Network\Win2k\English\PCLEmul\Win2k.inf.
Click Open. Click OK.
7. The driver is located. Click Next.
8. Files are copied. Click Finish.
Print a Test Page
1. Click Start®Settings®Printers.
2. Right-click OKIB4300(PCL).
3. Click Properties.
4. Click the Print Test Page button.
USB Install: Windows
®
2000
To Next Page
Loading...
