8
INSTALL THE PRINTER DRIVER
1. Check that the cable is installed.
2. Turn the printer on.
3. Insert the CD into your CD-ROM drive.
4. Click Start®Run®Browse. Browse to your CD-ROM
drive and double-click Install.exe, click OK.
5. The License Agreement appears. Click I Accept.
Click Next.
6. The Menu Installer screen appears.
7. Click the Printer Driver Installer button.
8. Follow the on-screen instructions to complete the
installation. If the Digital Signature dialog appears,
click Yes.
Note: NT 4.0 Users
This driver provides the benefit of increased
throughput if ECP is enabled in your
computer’s BIOS. See your computer’s manual
for information on how to enable ECP.
Print a Test Page
1. Click Start®Settings®Printers.
2. Right-click OKIB4300(PCL).
3. Click Properties.
4. Click the Print Test Page button.
Parallel Install: Windows
®
Me, 98, 95, NT 4.0
To Next Page
Loading...
