Installing the Software 9
Installing the Software
The CD supplied with your Flash DIMM installs the Storage Device Manager
software, used to download fonts and PCL macros to the Flash DIMM:
1. Place the CD in your CD-ROM drive and wait for it to autorun.
(If the CD does not autorun, click Start → Run → Browse. Browse to
your CD-ROM drive and double-click Install.exe, then click OK.)
2. Follow the on-screen instructions to complete the installation.
3. Exit the Menu Installer.
To Open Storage Device Manager
Click Start → Programs → Okidata → Oki Storage Device Manager
→ Oki Storage Device Manager.
For Information on Using Storage Device Manager
See the Reference PDF file in the root directory of the CD.
To Next Page
