Oki B4400n Installation Instructions

2
2. Position the paper guides in the
tray.
3. Fan the paper.
4. Lift the paper bar (1) and load
paper (up to 500 sheets 20-lb.
US Bond). Keep the stack below
the full line (2).
5. Lower the paper bar and push
the tray back into the printer.
Note: To install paper in Tray 1:
a. Open the Tray 2 front panel.
b. Slide Tray 1 out.
AUTOFEED
To set the printer to switch to Tray 2
when Tray 1 is empty:
Printers with Operator Panel
Set AUTOTRAY on in the Print
Menu.
Printer with online Status Monitor
Go to the Paper tab in the Status
Monitor. Select Auto Tray Switch.
Activate the Tray in the
Printer Driver
Windows
®
PCL Driver
1. Click
Start → Settings → Printers
[Printers and Faxes for XP].
The Printers (Printers and
Faxes) dialog box opens.
2. Right click the Oki printer icon,
then click Properties.
3. Click the Device Option(s) tab.
4. For Available Tray, select Lower
Cassette.
5. Click OK. Close the Printers
(Printers and Faxes) dialog box.
PostScript Emulation Driver
Printers with Postscript option
installed
1. Click
Start
→ Settings → Printers
[Printers and Faxes for XP].
The Printers (Printers and
Faxes) dialog box opens.
2. Right click the Postscript
emulation printer icon, then
click Properties.
3. Next:
• Windows XP, 2000 and NT
4.0: click the Device Settings
tab.
• Windows Me and 98: click the
Device Options tab.
4. Next:
• Windows XP, 2000, NT 4.0
and Me: under Installable
Options, click Available Tray
and select 2.
• Windows 98: under Change
setting for Available Tray,
select 2 (1 Optional Tray).
5. Click OK. Close the Printers
(Printers and Faxes) dialog box.
Macintosh
®
PostScript Emulation Driver
Printers with PostScript option
installed
OS 8.x and 9.x
1. Activate Chooser from the
Apple menu.
2. Select LaserWriter 8.
3. Click Printer
→ Setup.
4. Click Configure.
5. Change the Available Tray
setting to 2 (1 Optional Tray).
6. Click OK twice.
7. Close Chooser.
OS X.1
No activation is required.
OS X.2
1. Activate Print Center from Local
Hard Drive
→ Applications →
Utilities → Print Center.
2. Highlight the printer name.
Select from the menu
Printers
→ Show Info.
3. Click the Available Tray
drop-down menu and select 2
(1 Optional Tray).
4. Click Apply Changes. Exit to
the desktop.

Oki B4400n Specifications

General

Brand	Oki
Model	B4400n
Category	Printer
Language	English