C9650 User’s Guide> 49
3. Connect an Ethernet cable between the printer and an
Ethernet hub.
4. Turn on the printer and then the computer.
If your printer is to be installed as a network printer, please refer to
the relevant section in the Software Installation Guide and
Configuration Guide for further details on how to configure the
network connection before installing the printer drivers.
NOTE
Administrator’s authority is required when installing a network
connection.
U
SING
THE
D
RIVERS
CD
Insert the Printer Software CD into your computer and follow the on-
screen instructions. You are prompted to follow a set of basic steps
to configure the display panel language, install drivers and other
software and finally print a test page to check that your printer is
operating correctly.
To Next Page
Loading...
Need help?
General
