OkiLAN 8100e Network User’s Guide
Microsoft Windows - 105
Windows 2000
1. Click the [Start] button, select [Settings] and then click
[Network and Dial-up Connections].
2. Double-click the [Local Area Connection] icon. In the [Local
Area Connection Status] dialogue box, click [Properties].
3. In the [Local Area Connection Properties] dialogue box, if
the [NetBEUI Protocol] is not listed, click [Install].
4. In the [Select Network Component Type] dialogue box,
select [Protocol] and click [Add].
5. In the [Select Network Protocol] dialogue box, select
[NetBEUI Protocol] and click [OK].
6. Click [Close] in the [Local Area Connection Properties]
dialogue box.
7. Click the [Close] button in the [Local Area Connection Status]
dialogue box.
To Next Page
Loading...
Need help?
General
