OkiLAN 8100e Network User’s Guide
Microsoft Windows - 106
Windows XP
Although you can install the NetBEUI protocol into Windows XP, it
is not supported. You should be able to use NetBEUI on LAN
connections although you will not be able to use this on Remote
Access Service Connections.
1. In the [Start] menu, select [Settings] then [Control Panel].
2. Double-click [Network Connections].
3. Right-click the adapter you wish to add NetBEUI to and then
click [Properties].
4. On the [General] tab, select [Install].
5. Select [Protocol] and then [Add].
6. Select [Have Disk] and insert your Windows XP CD-ROM.
Open the Valueadd\msft\net\netbeui folder, click the
Netnbf.inf file and then click [Open]. Now the printer has
been configured and NetBEUI has been installed; you can
configure Windows to print over the network.
To Next Page
Loading...
Need help?
General
