Introduction > 10
R
EAR
VIEW
This view shows the connection panel, the rear output stacker and the location of the
optional duplex (two-sided printing) unit.
When the rear paper stacker is folded down paper exits the printer through the rear of the
printer and is stacked here face up. This is mainly used for heavy print media. When used
in conjunction with the multi purpose feed tray, the paper path through the printer is
essentially straight. This avoids bending the paper around curves in the paper path and
enables feeding of up to 220g/m² media.
C
HANGING
THE
DISPLAY
LANGUAGE
The default language used by your machine for display messages is English. If required,
this can be changed using the Panel Language Set-up utility.
1. ON/OFF switch.
2. AC power socket.
3. USB interface.
4. Network interface.
1
1. The Network Interface may have a protective “plug” which must be
removed before connection can be made.
5. Duplex unit (when fitted).
6. Rear, face up, 100 sheet stacker.
7. Parallel Port.
2
2. C821 and C830.
1
2
5
6
3
4
7
To Next Page
Loading...
Need help?
General
