Oki C821 - Page 61

Menu functions - C821 and C830 > 61
IBM PPR
Setup
(cont.)
Fit to
Letter
Enable/Disable Sets the printing mode that can fit print data, equivalent
to 11 inches (66 lines), in the LETTER-size printable area.
Text
Height
Same/Diff Sets height of a character.
SAME: Regardless of CPI, same height
DIFF: According to CPI, character heights vary.
Continuous
Paper Mode
On/Off Sets printer for using continous feed stationary.
EPSON FX
Setup
Character
Pitch
10 CPI/12 CPI/
17 CPI
20 CPI/
Proportional
Specifies character pitch in Epson FX emulation.
Character
Set
SET-2
SET-1
Sets a character set.
Symbol Set IBM-437 Sets the Symbol Set for Epson FX Emulation.
(see machine operator panel for complete list).
Letter O
Style
Enable/Disable Specifies the style that replaces ø (9B) and ¥ (9D) with ø
(ou) and Ø (zero).
Zero
Character
Normal/Slashed Specifies the style of 0(zero). SLASHED: SLASH ZERO
Line Pitch 6/8 LPI Sets line space.
White Page
Skip
On/Off Sets whether to eject a blank sheet. Available only when
simplex is set.
CR Function CR/CR+LF Sets action when CR code is received.
Line Length 80/136 column Specifies the number of characters per line.
Form Length 11/11.7/12 inch Specifies the length of paper.
TOF Position 0.0/0.1/~1.0
inch
Sets the position from the top edge of paper.
Left Margin 0.0/0.1/~1.0
inch
Sets the amount to shift the horizontal print start position
to the right.
Fit to Letter Enable/Disable Sets the printing mode that can fit print data, equivalent
to 11 inches (66 lines), in the LETTER-size printable area.
Text H e ight Same/Diff Sets height of a character.
SAME: Regardless of CPI, same height
DIFF: According to CPI, character heights vary.
Continuous
Paper Mode
On/Off Sets printer for using continous feed stationary.
ITEM SETTINGS EXPLANATION