Oki C821 User Manual

Menu functions - C821 and C830 > 63
HDD Setup This item is displayed only if a HDD (option) is installed.
Initialize Execute Initializes the HDD to the factory default setting. Machine
performs partition-division, and initializes each partition.
When this menu is executed, the following confirmation
message appears.
Are You Sure? Yes/No
If No is selected, you will return to the previous menu.
If Yes is selected, the following confirmation message
appears.
Execute Now? Yes/No
If No is selected, you will return to the previous menu.
The request to execute HDD initialization is put into the
memory and initialization will be executed at the next
power cycle.
If Yes is selected, shutdown takes place, and the HDD is
initialized at power Off/On cycle.
Resize
Partition
PCL nn%/
Common mm%/
PSll%/<Apply>
Specifies the size of partition. Specifies a size by ratio to
the whole HDD in % (1% unit).
nn,mm,ll: 1 - 98 and nn+mm+ll=100
The sizes are displayed in the partition list and can be
changed by selecting the partition size to be changed. If
Apply is selected, the following confirmation message
appears.
Are You Sure? Yes/No
If No is selected, you will return to the previous menu.
If Yes is selected, the following confirmation message
appears.
Execute Now? Yes/No
If No is selected, you will return to the previous menu.
The request to execute the partition size change request
is put into the memory and the hard disk initialization and
partition size change will be executed at next power cycle.
If Yes is selected, shutdown takes place. Hard disk
initialization and partition size change will be executed at
Power Off/On cycle. (If one partition size is modified, the
others are also modified.) If any partition size is modified,
Initialization of HDD needs to be executed as well.
If a previously used HDD is installed, HDD initialization
also takes place. If a HDD, which has been used before, is
installed, the layout of this menu may be different from
that of each partition. (The previously used layout will be
displayed.)
In Non-PS machines, PS is replaced by COMMON, so the
message is displayed as “PCL/COMMON/COMMON”.
ITEM SETTINGS EXPLANATION

Oki C821 Specifications

General

Brand	Oki
Model	C821
Category	All in One Printer
Language	English