Troubleshooting > 98
13. Pull down the MP Tray using the depressions (b). Lift the front cover release lever
and lower the front cover.
14. Check inside the cover for sheets in this area and remove any that you find, then
close the cover.
15. Pull out the paper tray(s) and ensure that all paper is stacked properly, is
undamaged, and that the paper guides are properly positioned against the edges of
the paper stack. When satisfied, replace the tray.
16. Finally, close the top cover and press down firmly so that the cover latches closed.
When the jam has been cleared, if Jam Recovery is set to ON in the System Configuration
Menu, the printer will attempt to reprint any pages lost due to paper jams.
b
b
To Next Page
Loading...
