20
•
English
Clearing Media Jams (cont.)
7. If the sheet is difficult to
remove from the fuser:
Caution!
The fuser may be hot! It is
clearly labelled. Do not touch it.
a. If it is not already in use,
lower the rear exit tray
b. Reach in and push the fuser
release lever (1) and pull the
sheet out from the back.
c. If you are not using the rear
exit tray, close it.
8. Replace the image
drums/toners, being careful to
install them in the proper
sequence.
C = Cyan
M = Magenta
Y = Yellow
K = Black
To Next Page
Loading...
Need help?
General
