33
•
English
Maintenance
Cleaning the LED Heads
Clean the LED heads:
• any time you replace a toner
cartridge (an LED lens cleaner is
included with each replacement
toner cartridge)
• if printing is showing signs of
faded images, white stripes or
blurred letters
1. Open the top cover.
Caution!
Do not use methyl alcohol or
other solvents on the LED head
as damage to the lens surface
will occur.
2. Use the LED cleaner provided
with the toner cartridges or a
soft, lint-free cloth to gently wipe
each of the four heads (1). Move
the cleaner as shown, using a
fresh section for each pass.
3. Close the top cover.
To Next Page
Loading...
Need help?
General
