Oki C831dn User Manual

- 125 -
Network Setting Items
5
5. Network Settings
Shaded text indicates the factory default setting.
Item
Setting Description
TELNET
Web
browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Windows)
Network
Card
Setup
(Mac)
EAP timeout - - - - 10 Set the timeout to wait
for the response from the
server during IEEE802.1X
authentication. Set the
value within the range
of 10 to 60 seconds.
Normally, use the factory
default setting.
-
60
 IPSec
Shaded text indicates the factory default setting.
Item
Setting Description
TELNET
Web
browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Windows)
Network
Card
Setup
(Mac)
IPSec IPSec - - - ENABLE Set whether to use IPSec.
DISABLE
- IP Address
1-50
- - - 0.0.0.0 Specify the host address
allowed to communicate
by IPSec.
● Use one-byte
characters separated
by a dot for an IPv4
address.
● Use one-byte
alphanumeric
characters separated
by a colon for an IPv6
global address.
● IPv6 link-local
address is not
supported.
- IKE
Encryption
Algorithm
- - - 3DES-CBC Set the IKE encryption
method.
DES-CBC
- IKE Hash
Algorithm
- - - SHA-1 Set the IKE hash method.
MD5
- Dife-Hellman
Group
- - - Group1 Set the Dife-Hellman
group used in Phase1
Proposal.
Group2
- LifeTime - - - 600 Set the lifetime of
ISAKMP SA. Normally,
use the factory default
setting.
86400
28800
- Pre-shared
Key
- - - (NULL) Set the pre-shared key.
- Key PFS - - - KEYPFS Set whether to use Key
PFS (Perfect Forward
Secrecy).
NOPFS

Oki C831dn Specifications

General

Brand	Oki
Model	C831dn
Category	Printer
Language	English