Oki C831dn User Manual

- 136 -
Changing Network Settings From the Web Page
5
5. Network Settings
Conguring Your Computer
Memo
● Be sure to congure the printer before conguring your
computer.
1 Click [Start] and select [Control
Panel]>[Administrative Tools].
2 Double-click [Local Security Policy].
3 On the [Local Security Policy] window,
click [IP Security Policies on Local
Computer].
4 From the [Action] menu, select [Create
IP Security Policy].
5 On the [IP Security Policy Wizard],
click [Next].
6 Enter a [Name] and a [Description]
and then click [Next].
7 Deselect the [Activate the default
response rule (earlier versions of
Windows only)] check box and then
click [Next].
8 Select [Edit Properties] and then click
[Finish].
9 On the IP security policy properties
window, select the [General] tab.
10 Click [Settings].
11 On the [Key Exchange Settings]
window, enter a value (minutes) for
[Authenticate and generate a new
key after every].
Note
● Specify the same value as [Lifetime] specied in the
conguration for "Phase1 Proposal" in “Conguring
Your Printer” P.135. Although [Lifetime] is specied
in seconds, enter a value in minutes for this step.
12 Click [Methods].
13 On the [Key Exchange Security
Methods] window, click [Add].
14 Specify [Integrity algorithm],
[Encryption algorithm] and
[Dife-Hellman group].
Note
● Select the same value that was specied
in [IKE Encryption Algorithm],
[IKE Hush Algorithm], and
[Dife-Hellman group] at the time of conguration
for "Phase1 Proposal" in “Conguring Your Printer”
P.135.
15 Click [OK].
16 On the [Key Exchange Security
Methods] window, click [OK].
17 On the [Key Exchange Settings]
window, click [OK].
18 On the IP security policy properties
window, select the [Rules] tab.
19 Click [Add].
20 On the [Security Rule Wizard], click
[Next].
21 On the [Tunnel Endpoint] screen,
select [This rule does not specify a
tunnel] and then click [Next].
22 On the [Network Type] screen, select
[All Network Connections] and then
click [Next].
23 On the [IP Filter List] screen, click
[Add].
24 On the [IP Filter List] window, click
[Add].
25 On the [IP Filter Wizard], click [Next].
26 On the [IP Filter Description and
Mirrored Property] screen, click
[Next].
27 On the [IP Trafc Source] screen, click
[Next].
28 On the [IP Trafc Destination] screen,
click [Next].
29 On the [IP Protocol Type] screen, click
[Next].
30 Click [Finish].
31 On the [IP Filter List] window, click
[OK].
32 On the [Security Rule Wizard], select
the new IP lter from the list and then
click [Next].

Oki C831dn Specifications

General

Brand	Oki
Model	C831dn
Category	Printer
Language	English